Pure aluminum plate’s thickness:0.1mm-20mm;width:800-2200mm.
Alloy aluminum plate’s thickness:0.5mm-260mm;width:800-2800mm.
Curtain wall flat aluminum plate’s thickness:0.95mm,1.35mm,1.85mm,2.35mm,2.7mm,2.85mm;width:0.8-1.5m.
Aluminum plate’s width:200mm-2650mm.
Aluminum plate’s length:Within 16m.
Aluminum plate refers to the rectangular plate processed by aluminum ingot rolling, which is divided into pure aluminum plate, alloy aluminum plate, thin aluminum plate, medium thickness aluminum plate, pattern aluminum plate.
1100 aluminum plate belongs to pure aluminum plate series, its strength is relatively low, has excellent ductility, form-ability, weld-ability and corrosion resistance.After anodic oxidation, the corrosion resistance can be further improved and the beautiful surface can be obtained.1100 aluminum plate cannot heat treatment strengthen.
Pure aluminum plate series according to the last two Arabic numbers to determine the minimum aluminum content of this series, such as 1100 series last two Arabic numbers for 00, according to the international brand naming principle, the aluminum content must reach more than 99.00% for qualified products.
With high corrosion resistance, electrical conductivity and thermal conductivity, its density is small, good plasticity, through pressure processing can produce a variety of aluminum, but low strength.
China's aluminum alloy technical standard (GB/T3880-2012) also clearly stipulates that 1100 aluminum content reaches 99.0%.
| Low density | The density of pure aluminum is close to 2700kg/m3, about 35% of the density of iron. |
| Hardening | Pure aluminum can be more than doubled in strength by cold working.Moreover, it can be alloyed by adding magnesium, zinc, copper, manganese, silicon, lithium, scandium and other elements, and further strengthened by heat treatment. Its specific strength can be comparable to that of high-quality alloy steel. |
| Easy to work | Aluminum can be cast by any casting method. |
| Aluminum has good plasticity and can be rolled into thin sheet and foil; | |
| Draw pipe and wire;Extrusion into a variety of civil profiles;Most machine tools can achieve the maximum speed of turning, milling, boring, planing and other mechanical processing. | |
| Corrosion resistance | Aluminum and its alloy surface, easy to generate a layer of dense, firm Al2O3 protective film.This protective coating can only be destroyed by the violent action of halogen or base ions. Therefore, aluminum has a good atmospheric (including industrial atmospheric and Marine large steam) corrosion and water corrosion ability. Can resist the corrosion of most acid and organic matter, using corrosion inhibitor, can resist weak alkali corrosion;The corrosion resistance of aluminum alloy can be improved by adopting protective measures. |
| No low temperature brittleness | aluminum below zero degrees Celsius, with the reduction of temperature, strength and plasticity will not decrease, but improve. |
| Good electrical and thermal conductivity | Aluminum is inferior to silver, copper and gold in electrical and thermal conductivity. |
| Strong reflectivity | the polished surface of aluminum has a reflectivity of more than 80% to white light, and the higher the purity, the higher the reflectivity. |
| At the same time, aluminum on infrared, ultraviolet, electromagnetic wave, thermal radiation and so on have good reflection performance. | |
| No magnetic | Impact without spark |
| Nuclear radiation resistance | Yeap |
| Surface | Beautiful |
| Sound absorption | Have |
| 1***series Chemical composition(%): | ||||||||
| Alloy | Si | Fe | Cu | Mn | Mg | Zn | Ti | Ni |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | 0.05 | 0.03 | - |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | 0.05 | 0.03 | - |
| 1070 | 0.2 | 0.25 | 0.03 | 0.03 | 0.03 | 0.07 | 0.03 | - |
| 1080 | 0.15 | 0.15 | 0.03 | 0.02 | 0.02 | 0.06 | 0.02 | - |
| 1100 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | 0.05 | 0.03 | 0.1 |
| 1145 | 0.55 | 0.55 | 0.05 | 0.05 | 0.05 | - | 0.03 | - |
| 1200 | 1 | 1 | 0.5 | 0.5 | - | 0.05 | 0.05 | 0.1 |
| 1235 | 0.65 | 0.65 | 0.5 | 0.5 | 0.5 | 0.1 | 0.06 | 0.1 |
| Thichness | 0.1mm-600mm |
| Width | 20-2650mm or customer requirements |
| Length | as customer's requirements |
| Grade | 1070,1060,1050,1030,1100,2017,2024,2117,2014,2214,2618,2018,2218,2219,2021,3003,5052,5154,5083,5456,5056,6165,6061,6055,6063,7001,7178,7075, |
| Temper | HO,H12,H14,H16,H18,H19,H22,H24,H26,H28,F,H112,T651,T3,T451,T4,T6,ect |
| Surface | Flat , mill, bright, polished, hair line, brush,sand blast, checkered,embossed, etching ,spray paint, electroplate, anodic oxidation, infiltration, oil spraying, sand blasting |
| Form | coil,sheet,profiles,bar,tube,casting |
| Sample | Free sample fee |
| Back lamination | polykraft paper, polysurlyn, kraft paper, craft paper |
| Inspection | SGS,or other Third Party inspection |
| Payment | T/T, L/C,Western Union, |
| Pyaterm | EXW,FOB,CIF,CFR |
| Package | PVC+ waterproof paper + strong sea-worthy wooden package |
1100 aluminum plate is usually used for good forming performance, high corrosion resistance, does not need high strength, such as food and chemical handling and storage equipment, sheet metal products, hollow metal spinning processing with drawing goods, welding combination keys, reflectors, nameplates, etc.
1100 aluminum strip is generally used in utensils, radiators, bottle caps, printing plates, building materials, heat exchanger components, but also can be used as deep stamping products.It is widely used in various fields from cooking utensils to industrial equipment.
We will ship them within 5 days after received deposit for stock goods ;customize size need about 10 days to ship;OEM products need about 15 days to ship.
And also we use steel factory original packaging with export wooden pallet to protect the goods well.
